3M™ DBI-SALA® Nano-Lok™ Edge Self Retracting Lifeline, Cable 8' - 3500216
8 ft. (2.4m) lifeline with 3/16" (5mm) galvanized steel wire rope and aluminum rebar locking hook, quick connector for harness mounting.
About this product
Quick Connect Self Retracting Lifeline Designed for Foot-Level Tie-Off and Sharp Edge Applications
The Nano Lok™ edge is designed specifically for foot-level tie-off and sharp edge applications often used in construction. For ease of use, it is ergonomically built and is suitable for direct connection to most harnesses. The extremely compact and lightweight design makes it practically unnoticeable when worn, keeping out of the worker's way. It is also an excellent choice as a lanyard replacement.
There are numerous models to choose from to accommodate almost every need, whether your application requires single or twin leg configurations, mounting on an overhead anchor, or connecting directly to the harness. Nano Lok™ locks quickly — stopping a fall within inches — providing more protection at low heights. Also, tension is always kept on the lifeline, which reduces dragging, snapping and trip falls. Both features are key safety improvements.
- Designed for foot-level tie-off and sharp edge applications
- Built-in connector for single-leg SRL direct attachment to harness
- 8 ft. (2.4m) lifeline with 3/16" (5mm) galvanized steel cable lifeline
- Aluminum rebar lock hook on end of lifeline
- Extremely compact, lightweight design
- Tough and impact resistant thermoplastic housing
- Swiveling anchorage loop
3M™ DBI-SALA® Nano-Lok™ Edge Self Retracting Lifeline, Cable 8' - 3500216 Specifications *( 1,2 )
Product Specification Disclaimer*( 1,2 )
*1. Manufacturers specifications are supplied by the manufacturer and are subject to change without notice. The data and information contained in these specification sheets are representative; the ratings supplied are suggested as guidelines and should only be used for evaluating your specific application.
**2. Although Reliable Electric Products Company Inc. has made every effort to ensure the accuracy of information by third parties, it is ultimately the customer’s responsibility to validate these specifications to ensure they are suitable for SAFE use in a particular application. Reliable Electric Products Company Inc. disclaims to the extent permitted by law, any warranty or liability.