DBI-SALA® SecuraSpan™ Rebar/Shear Stud HLL Stanchion with Base (7400215)
Stanchion with rebar/shear stud base with intermediate and end anchor brackets, fits 1/2 in. to 1 in. diameter (#4 to #8 rebar) and 4 in. to 12 in. center to center (10.1-30.5 cm).
About this product
3M™ DBI-SALA® SecuraSpan™ Rebar/Shear Stud HLL Stanchion with Base
Extremely lightweight and portable, these systems incorporate a modular, multi-base design that accommodates a wide range of steel and concrete beams. Spans can be up to 60 ft. (18.3 m) and with the optional bypass brackets, the system can be configured to run indefinitely for ultimate jobsite flexibility. You can always depend on our horizontal safety systems for mobility and fall protection when working at height. That’s why safety engineers and site directors choose DBI-SALA® horizontal lifelines. We offer the broadest selection, as well as significant advantages in safety and productivity. A horizontal lifeline may appear to be a basic line strung between two anchors, but it is not. It is critical to choose a system that has been precision engineered and rigorously tested to meet regulations. These systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable anchorage points.
- Stanchion with rebar/shear stud base, intermediate and end anchor brackets to configure your own SecuraSpan™ system
- Fits rebar or shear stud 1/2 in. to 1 in. diameter (#4 to #8 rebar) and 4 in. to 12 in. center to center (10.1-30.5 cm)
- Lightweight and portable design
- Top mounted bolt and clamp adjustment system
- Extremely durable construction
- Single and multi-span indefinite length system configurations
- Pass-thru 100% tie-off protection
DBI-SALA® SecuraSpan™ Rebar/Shear Stud HLL Stanchion with Base (7400215) - Specifications *( 1,2 )
*1. Manufacturers specifications were supplied by the manufacturer and are subject to change without notice. The data and information contained in these specification sheets are representative; the ratings supplied are suggested as guidelines and should only be used for evaluating your specific application.
**2. Although Reliable Electric Products Company Inc. has made every effort to ensure the accuracy of information by third parties, it is ultimately the customer’s responsibility to validate these specifications to ensure they are suitable for SAFE use in a particular application. Reliable Electric Products Company Inc. disclaims to the extent permitted by law, any warranty or liability.